燦佶實業有限公司  TSAN CHIEH ENTERPRISE CO, LTD.

Automatic Hydraulic & Pneumatic Drilling Machine

快速進刀、切削、快速返回原位等自動循環動作均使用〝 同一開關操作 〞即可!!

空壓推送，油壓緩衝，操作簡易、鑽孔、鉸刀、多軸化精密自動化、大大的提高您的生產力

FEATURES︰

1.Complete one cycle of automatic spindle operation started with push button.

2.Built-in air hydro checker system,converting air to hydraulic pressure.

3.Constant quill drive, directly by cylinder pressure.

4.High repeatability of drill depth with timer. (option)

5.Easy stroke adjustment. 6.Mroe high productivity with multi-spindle head or special purpose machine

● 用附帶之旋鈕來調整切削速度，全行程和快速進刀衝程，設定非常簡單，只須依照刻度設定行程，設定一次就能夠重複地作同樣的加工。

● 設定快速進刀衝程為50mm，全行程80mm的狀態，故快速進刀衝成為50mm，切削行程就變成30mm。亦可裝置多軸器。

Model TD1-103
Drilling Capacity   19 mm (mild steel)
Spindle taper M.T No.2 
Spindle stroke  110 mm
Spindle Speed r.p.m   60Hz 450/750/1300/2000 
 Spindle Speed r.p.m    50Hz   375/625/1080/1670
Rapid feed range  Min. 95 mm 
Cutting feed stroke  10~110 mm
Cutting feed speed  Min. 40 mm
Swing  430 mm
Max. Distance between spindle and table 160~460 mm
Working table  340 x 340 mm
Working pressure 5 kgf/cm² 
Motor  (1HP) 0.75 kw-4P
Net weight  198 KG

Automatic Hydraulic ＆ Pneumatic Drilling Machine

Model Capacity Stroke  Swing Tapper    Range of RPM   
50Hz  60Hz
TD1-100 13 mm 100 mm 330 mm JT6  2500
1700
850		 3000
2000
1000
Net weight Distane between spindle to table Working table Motor Pressure Cutting speed
125KG 350 260X260 1HP/4P 5 kgf/cm² Min. 40 mm/min

燦佶實業有限公司 TSAN CHIEH ENTERPRISE CO.,LTD.
70176台南市東區大同路二段705號  No.705, Sec. 2, Ta Tung Rd., East Dist., Tainan City 701, Taiwan
Tel:    (886) 6 2687573 or 6 2698132   Fax:   (886) 6 2677693
service@tsanchieh.com.tw  ｜  管理登入 ｜